The k2

[wiccanvixen]

The K2 EMF meter is a standard EMF detector, much like it's competitors. Most EMF detectors use a needle that will move up and down when indicating electromagnetic energy. As there is an increase in the energy, the needle will move to the right, indicating the higher levels. The K2 meter uses lights to indicate the energy instead of a needle, flashing and then finally staying light at the level found with the meter.

The K2 meter was tested by Chris Fleming, psychic medium from the show Dead Famous on the Biography channel. He wanted to use the K2 meter in conjunction with information he was said to be picking up on from any ghosts or spirits present. He found the meter to be accurate in doing this, and soon the 'buzz' started in the paranormal circles about the K2 meter.

"I have been using many different devices to compliment my investigations and provide scientific evidence to support my "Sixth Sense." I have quickly found the K-II meter device to be especially useful tool in communicating with the spirit world." -Chris Fleming -from Unknown Magazine

When the K2 meter is on, you can ask a question from the spirits, asking them to respond with 'flash once for no, twice for yes', or a similar method. If you get a response when setting up this method and it works, then continue on with further questions that can be answered in a yes or no form. The K2 meter has been reported as being tested not only by Chris Fleming, but by other paranormal investigators as well, and seems to be getting good reviews. If the K2 EMF detector can indeed communicate with ghosts in real time, this will be a small breakthrough in the paranormal research field.


here is my problem with the k2 meter..as well as the EMF meter for that matter. There ARE people that can trigger them..either on purpose or subconsciously..Certain people have an elevated biokinetic field which will literally register on these devices. Those that are intelligent and aware of this anomaly, will make others aware of it while on an investigation, and recuse when these pieces of equipment are being used. Otherwise your results with the K2 are questionable as to what exactly is triggering it. I know this, because I am one of the people who can set one off. We have run several tests which indeed confirm it IS me that is causing the meter to bury on approach. Therefor, any results found when I am present are NOT admittable as evidence.

It kinda rots...BUT..it is good information to have when at an investigation. And yes, the fact that I can set off the meters IS a noted one, and has been witnessed on MANY noted occasions by MANY people.

[SomeDude]

I have not witnessed it at all and leads me to challenge an experiment to you. (You know me!) Anyhow, I agree while you have some extraordinary abilities on the PK spectrum, I will strongly hypothesize that you don't trigger or make meters "bury" when approached.

Perhaps its happened but I believe that there are other variables at play. For instance..

Last night on a case, you came out into the living room stating that (and demonstrating) that when you pointed the EMF meter towards yourself, that it went off. When you swung it down to the floor, it quit.

After I demonstrated that (by doing this to myself as well), the same thing happened to me. I am about as psychic or biomagnetic as a dead carp. My explanation is that the magnetic pickup coil (located in all standard EMF meters) is sensitive when being shaken or disturbed by vibration/movement. Which is a fact. Try shaking the extended lead on a cell sensor or Dr. Gauss unit. It will go ape shit.

Just saying, I don't think your effecting the amount of equipment that you think you are. Maybe you get some response on the K-2 but the question is "why?". Just not ready to give into the theory that you disrupt or effect some of this equipment.

If we could prove that you do...we'd be a million dollars richer per James Randi. :/

Lets experiment with this! Lets setup a study that focuses on this theory. As a group, we can do this on our next case or gathering. With different meters, including a genuine K-2.

What do you say?

[paulam]

I'm headed out for work so I don't have time for my opinions on the subject at the moment but here is an interesting blog post by Patrick Burns on his MySpace page:

blog.myspace.com/index.cfm?fuseaction=blog.view&FriendID=15303690&blogMonth=12&blogDay=20&blogYear=2007

[Chunkadunk]

I did notice that Sat night. Even if it is her, lets test it out. Nancy would make a great test subject. This is gonna be fun... mwahahaha

[SomeDude]

Absolutely. And just remember that the experiement is for all meters and equipment similar. Not just the K-2. In fact, my initial post has nothing to do with the K-2. ;-)

I've never used one or witnessed one operate.

[msnarnia]

We actually did a sort of experiment on this same thing. Saturday, Jeff, I, Summer, Bob, and Ron. We were all trying to get the different EMF meters we had to go off by or energy, with no success..So it should be an interesting experiment..Count us in.

[egiese1072]

Hey everyone...just a thought....If the K-2 or EMF meter is more sensitive to one individual over another, could you not do baseline testing on each member of a group prior to an investigation? For example, team member A sets off 1 light on the K-2 when he/she is 5 feet from it, then any other reading out of that norm when team member A is 5 feet from the meter would be anomalous. The same could be used for the EMF meter. Though I know these are not the only exclusive tools used, and I don't know much about EMF fields, or how you conduct investigations for that matter, just thought I would throw my thought at ya...happy hunting!

[wiccanvixen]

Just a "Beware and bewarned" the k-2 can be triggered by ANY type of hand held radio..including and not limited to cell phone radios, and the normal band radios we use on investigations...we will be conducting some "controlled" experiments with the k-2 with absolutely NO radio or cell phones allowed within any proximity of the device and we will see what happens. Those of u who shake ur heads at this..lol..take a radio and hit the receiver or send button next to the k2..and watch her light up

[navalspecforces]

I have also found that if you are near to a amateur radio station or a basic CB radio unit or at least 1-3 houses away depending on the strength you can pick up interference and will make it light up. I have been experimenting with the K2 also. If anyone is interested in some of my finding just yell at me. Be good y'all

[wiccanvixen]

i would love if you would post them here....makes for excellent reading..and plus, an informed investigator is the best type..lol

[wiccanvixen]

FYI..Brent and i ordered one so we don't have to keep borrowing..lol..hopefully we will have it before Thursday

[navalspecforces]

I will gather that info for you. :-)

[navalspecforces]

Well I've been messing with the Guass meters "K2" and found alot of different Appliances, TV's, Radios and speakers, PC's and even outside power lines can offset the readings but I just got a Delso K2 meter I'm playing with and I'm not getting as much interference with that it was more pricey around 60 bucks but I'm not yet sold on the K2's yet. I will do research on line on everything and go out and buy them and see if i can get the same readings, there in a nice little place in Destin,FL that i believe has paranormal activity that i will use for testing.

[wiccanvixen]

i am not sold at ALL on the k2's...and this is even with the fact that i had an extremely unexplainable experience with it. I still feel it is too easily manipulated through external forces. Unless u are in an absolutely controlled environment which was minimal electrical in the area, as well as NO and i mean absolutely NO radios or phones in a 100 foot vicinity...it is just too easy to manipulate the results, and that does not mean that it would be a person on or with a team doing so...it could be anyone in the direct vicinity.

[Lurker]

To test the validity of the EMF device, why not keep a couple square feet of copper mesh near by? Well, mayhap a couple square feet of copper mesh brazed into a cube shape, with a lead that can go to a grounded outlet.

A small Faraday cage like this should impeded most EMF. test the cage with small radios/cell phones/ Cb's. If the cage is functional, any EMF detected my the K2 should have originated from within the cage.

The EMF sensor could them be more sensitive, as influence from outside of the cage could be removed..

Cheers!